WaveSub 182/2   Subwoofer as in Hobby Hifi 3/2019

WaveSub 182/2 is a passive versatile subwoofer which complements the rest of the loudspeakers with a powerful and deep bass.

The Subwoofer can be used in stereo with speakers with a SPL between 79 - 81 dB (2.83V, 1m).

WaveSub 182/2 is a loudspeaker with drivers of Wavecor . Passive radiators provide deep bass.

The kit is delivered with two of Wavecor SW182BD04 woofers and two of Wavecor PR182BD2 passive radiators.

The loudspeaker has been developed by Bernd Timmermanns.

The crossover consists of:
- a 2nd order low-pass filter (12 dB per octave slope) for the woofer.

The frequency response of this speaker is perfectly linear.

The decay spectrum is nearly perfect.

At medium volume, i.e. 90 dB at 1 m, the nonlinear distortions are below 1% above 100 Hz.

Our kit consists of

Kit without cabinet, price per speaker   EUR 1005,00 excl. VAT: € 844.54 / $ 912.10

Kit with high-end crossover

The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the Wavecor SW182BD04 mit Wavecor PR182BD2 are of type polypropylen (MKP) Clarity-Cap PWA 160.

• 2x electrolytic capacitor, etched, 270 μF/63 Vdc
• 2x electrolytic capacitor, unetched, 33uF / 70 Vdc
• 2x electrolytic capacitor, unetched, 68uF / 50 Vdc
• 2x electrolytic capacitor, unetched, 82uF / 50 Vdc
• 2x Mundorf baked varnish air core coil BL71, 27 mH/6.44 Ohm
• 2x Mundorf bs180 core coil 22mH/0.39 Ohm
• 2x MResist Supreme 2.2 Ohm / 20 Watt
• 2x MResist Supreme 8.2 Ohm / 20 Watt

The kit with high-end crossover also has a higher load capacity, as the coils in series with the two woofers have a cross-section of 1.8 mm² instead of only 1.4 mm².

Kit with high-end-crossover without cabinet, price per speaker   EUR 1172,00 excl. VAT: € 984.87 / $ 1063.66

Kits with different crossover frequencys

The kit WaveSub 182/2 you can get with different crossover frequencys. The quality of the crossover parts is in all kits the same like the 100 Hz version, only the values are different respective to the crossover frequency.

120 Hz Kit without cabinet, price per speaker   EUR 1003,00 excl. VAT: € 842.86 / $ 910.29

120 Hz Kit with high-end-crossover without cabinet, price per speaker   EUR 1167,00 excl. VAT: € 980.67 / $ 1059.13

140 Hz Kit without cabinet, price per speaker   EUR 988,00 excl. VAT: € 830.25 / $ 896.67

140 Hz Kit with high-end-crossover without cabinet, price per speaker   EUR 1144,00 excl. VAT: € 961.34 / $ 1038.25

170 Hz Kit without cabinet, price per speaker   EUR 981,00 excl. VAT: € 824.37 / $ 890.32

170 Hz Kit with high-end-crossover without cabinet, price per speaker   EUR 1142,00 excl. VAT: € 959.66 / $ 1036.44

200 Hz Kit without cabinet, price per speaker   EUR 985,00 excl. VAT: € 827.73 / $ 893.95

200 Hz Kit with high-end-crossover without cabinet, price per speaker   EUR 1127,00 excl. VAT: € 947.06 / $ 1022.82

240 Hz Kit without cabinet, price per speaker   EUR 977,00 excl. VAT: € 821.01 / $ 886.69

240 Hz Kit with high-end-crossover without cabinet, price per speaker   EUR 1099,00 excl. VAT: € 923.53 / $ 997.41

300 Hz Kit without cabinet, price per speaker   EUR 973,00 excl. VAT: € 817.65 / $ 883.06

300 Hz Kit with high-end-crossover without cabinet, price per speaker   EUR 1100,00 excl. VAT: € 924.37 / $ 998.32

universal PCB

If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. str-RA160, price per unit:   EUR 5,90 excl. VAT: € 4.96 / $ 5.35
We recommend two boards per kit (four boards for a speaker pair)

Home   Hobby HiFi Overview