Basic Line L   Floorstanding as in K+T 5/2018

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 90 dB
  • size (HxWxD): 900 x 200 x 230 mm
  • frequency range (-8dB): 40 - 25000 Hz
  • crossover frequency(s): Hz
  • speaker type: bass reflex

Omnes Audio Basic Line L is a 2,5 way floorstanding speaker.

Omnes Audio Basic Line L is a bass-reflex cabinet loudspeaker with drivers of Omnes Audio and Tang Band.

The kit is delivered with the following drivers:
- a Omnes Audio AMT 50 air motion transformer
- a Tang Band W5-704 midrange / bass driver
- a Tang Band W5-704 woofer

The loudspeaker has been developed by Thorsten Fischer.

The crossover consists of:
- a 2nd order high-pass filter (12 dB per octave slope) for the tweeter.
- a 2nd order low-pass filter (12 dB per octave slope) for the mids-woofer.
- a first order low-pass filter (6 dB per octave slope) for the woofer.

The frequency response of this speaker is nearly linear.

The decay spectrum is perfect.

At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 1% above 200 Hz and doesn't exceed 1,5% at 95 dB at 1 m between 300 and 15000 Hz.

An excerpt from the Klang+Ton review

Our kit consists of

  • Omnes Audio AMT 50
  • 2x Tang Band W5-704, 5 inch woofer
  • Bass reflex tube HP70, 68x160 mm, black
  • 0,5x PE sealing tape, 5x2 mm, 7.5 m
  • 1,5x Damping Sonofil 100 x 35 cm for 20 litres
  • Terminal T105 Au, with brass, gold plated
  • 3m Speaker cable 2x1.5 mm2, transparent
  • 1,5x Pan screws 3.5x17 black, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • Audaphon MKP CAP Superior 400 Vdc
  • Audaphon MKT CAP 160 Vdc
  • 1.0 mm air core coil
  • 0.7 mm air core coil
  • Mundorf H core coil H100
  • Metal-oxide resistor, 10W
  • Metal-oxide resistor, 10W

Kit without cabinet, price per speaker   EUR 206,00 excl. VAT: € 173.11 / $ 186.96

Kit with high-end crossover

The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the tweeter are of type polypropylen (MKP) Clarity-Cap ESA 630 V.

Kit with high-end-crossover without cabinet, price per speaker   EUR 237,00 excl. VAT: € 199.16 / $ 215.09

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 13,10 excl. VAT: € 11.01 / $ 11.89

universal PCB

If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 150x115 mm, tin plated, price per unit:   EUR 4,70 excl. VAT: € 3.95 / $ 4.27
We recommend one board per kit (2 boards per speaker pair)


Home   Klang+Ton Overview