Tas Sub Subwoofer as in K+T 6/2014

Technical data

impedance: 8 Ohm
sensivity (2,83V/1m): 94 dB
size (HxWxD): 700 x 500 x 700 mm
frequency range (-8dB): 25 - 200 Hz
crossover frequency(s): Hz
speaker type: bass reflex

Tas is a powerful satellit subwoofer system. It consists of Tas Top and Tas subwoofer

Tas is developed by Daniel Gattig.

The crossover consists of a 2nd order high-pass filter (12 dB per octave slope) and a 2rd order low-pass filter.

The frequency response is quite flat at an angle of 0 or 15 degree, the harmonic distortion is low (less than 0.3% between 400 and 3000 Hz at 95 dB, 1m). The decay spectrum shows small resonances at 500 and 1000 Hz; apart from that it is nearly without fault.

Conclusion of the magazine Klang+Ton:

Our subwoofer kit consists of

Celestion FTR18-4080FD
Monacor class-D amplifier module SAM-500D withh 500W RMS at 4 Ohm
6x Bass reflex tube HP100, 100x200 mm, black
PE sealing tape, 5x2 mm, 7.5 m
Neutrik Speakon NL4MPR, connector round, 4 pin
2x Speaker cable 2x2.5 mm2, transparent
8x 1 pieces drive-in nuts M6, DIN 6930 g zinc-plated
8x 1 pieces Allen screws M6x35, DIN 912, black
2x Visaton Countersunk screws 3.5x25, 8 pcs
4x Adam Hall 4909 rubber foot
4x PA handles
Plan for DIY kit

Kit without cabinet,
price per speaker EUR 843,00

excl. VAT: € 708.40 / $ 757.99

Our kit with 300W amplifier module

Instead of Monacor class-D amplifier module SAM-500D withh 500W RMS at 4 Ohm we deliver Monacor class-D amplifier module SAM-300D withh 300W RMS at 4 Ohm.

Kit without cabinet,
price per speaker EUR 704,00 excl. VAT: € 591.60 / $ 633.01

Our kit without amplifier module

The kit with active subwoofer module Monacor SAM-500D (see above) can also be combined with a subwoofer without module, which is then simply connected in parallel to the first one.

Kit without cabinet, without amplifier
price per speaker EUR 488,00 excl. VAT: € 410.08 / $ 438.79

Home Klang+Ton Overview